Texas Bids > Bid Detail
6515--Audie L. Murphy VA Hospital Spinal Cord Injury Service is seeking to purchase NEW Mobile Commode Chairs
Agency: | VETERANS AFFAIRS, DEPARTMENT OF |
---|---|
Level of Government: | Federal |
Category: |
|
Opps ID: | NBD00159371497186667 |
Posted Date: | Jan 11, 2023 |
Due Date: | Jan 18, 2023 |
Solicitation No: | 36C25723Q0226 |
Source: | https://sam.gov/opp/6d27a27ba3... |
Follow
Active
Contract Opportunity
Notice ID
36C25723Q0226
Related Notice
Department/Ind. Agency
VETERANS AFFAIRS, DEPARTMENT OF
Sub-tier
VETERANS AFFAIRS, DEPARTMENT OF
Office
257-NETWORK CONTRACT OFFICE 17 (36C257)
Looking for contract opportunity help?
Procurement Technical Assistance Centers (PTACs) are an official government contracting resource for small businesses. Find your local PTAC (opens in new window) for free government expertise related to contract opportunities.
- Contract Opportunity Type: Presolicitation (Original)
- All Dates/Times are: (UTC-06:00) CENTRAL STANDARD TIME, CHICAGO, USA
- Original Published Date: Jan 10, 2023 11:27 pm CST
- Original Response Date: Jan 18, 2023 12:00 pm CST
- Inactive Policy: Manual
- Original Inactive Date: Feb 02, 2023
-
Initiative:
- None
- Original Set Aside: Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside (FAR 19.14)
- Product Service Code: 6515 - MEDICAL AND SURGICAL INSTRUMENTS, EQUIPMENT, AND SUPPLIES
-
NAICS Code:
- 339113 - Surgical Appliance and Supplies Manufacturing
-
Place of Performance:
Department of Veteran Affairs Audie L. Murphy VA Hospital , TX 78229USA
The Department of Veterans Affairs is seeking both manufacturers and/or distributors of the exact match or functionally equivalent equipment/ services to the following listed below on Wednesday Jan 18, 2023; NLT 12PM NOON CST via e-mail only to Matt Lee; matthew.lee5@va.gov.
Please title email with Solicitation Number and Proposal Submission. Offers received after the exact time specified in the solicitation are considered late and may not be considered if the action would not unduly delay the acquisition or are deemed to be in the best interest of the Government.
Questions: All questions must be received by Thursday Jan 12, 2023 at 5PM CST. All questions submitted for this solicitation must be electronically sent to the following email address: to Matt Lee; matthew.lee5@va.gov. Please title email with Solicitation Number Questions/Proposal Submission. Questions received after the stated date and time, may be addressed at the discretion of the Contracting Officer.
Vendors are asked to please provide negative responses and referenced as No Bid .Â
ITEM NUMBER
DESCRIPTION OF SUPPLIES/SERVICES
QUANTITY
UNIT
UNIT PRICE
AMOUNT
0001
1.00
EA
Raz-AT600 - 22"W (56cm) frame. Heavy Duty Attendant Tilt Mobile Shower Commode Chair with stainless steel frames, 25? tilt range, proprietary Weight Assist Spring System (WASS), 20"H Multi-Position Back, tension-adjustable upholstery, head support fixture with small pad, four dual-locking 6" (150mm) casters, flip-up arm supports, foot supports and commode pan. User weight capacity 600 lbs. Shall Include a quantity of one (1) each unless noted otherwise in the description: Z36WR450 Weight Assist Spring System (WASS) with a weight range of: 350-450 lbs (159-205 kg) [for Raz-AT600] Z4CSHD HD Custom Visco Foam Seat - 22"W x 18"D - Left access Z4CSHD-A Custom Visco Seat - HD (Off-Chair Assembly - includes brackets/hardware) [for Raz AT600] - 22"W x 18"D - Right access Z5S22 Symphony Back 22"W (56cm) - Recessed solid back support [Not compatible with 15"H back frames] Z710HD Arm Support Lock Kit HD (pr) [for Raz-AT600/AP600/SP600] Z7FLL Long Molded Flat Armpad - Left (14"L x 3.25"W) [not compatible with Z5BAR10 arms and short reclining 2-pt arm supports] Z7FLR Long Molded Flat Armpad - Right (14"L x 3.25"W) [not compatible with Z5BAR10 arms and short reclining 2-pt arm supports] Z709N Adjustable Foot Supports HD (16"-20.5") (40-52cm) (pr) [for AP600/SP600/AT600] Z7NCS Neoprene Covers for Standard Footplates (pr) Z7OFLM [Quantity of 2] - Offset Foot Support Receiver (ea) - Lateral / Medial 2" offset Z7CSIC26 Calf Strap Snap-On Infection Control - for 26" (66cm) wide chair [not compatible with Z7FB] Z7HSTL Head Support w/ Large Pad [12" x 6" (30cm x 15cm)] Z7LTS2L Lateral Thoracic Support w/ Large Depth-Adjustable Pad - Left [6.5" x 4" ] Z7LTS2R Lateral Thoracic Support w/ Large Depth-Adjustable Pad - Right [6.5" x 4"] Z7LGT2L Leg Adductor w/ Large Adjustable Pad - Left [6.5" x 4"] [for Raz-CAT/AT/AT600] Z7LGT2R Leg Adductor w/ Large Adjustable Pad - Right [6.5" x 4"] [for Raz-CAT/AT/AT600] ZPBICXLHDT Pelvic Belt - Infection Control XLarge 2-piece w/ spacers, mounting plates, side-release buckle [fits seat frame widths 22"-26"] [for Raz-AT600] Z66T6 Anti-Tippers for 6" Casters (pr) installed on rear [for Raz-AT/CAT/AT600] Z675 Directional Caster Lock - fits on left rear caster [facilitates steering] [for Raz-AT/CAT/AT600]
LOCAL STOCK NUMBER: Z36022 0002
1.00
EA
Raz-AT600 - "W (56cm) frame. Heavy Duty Attendant Tilt Mobile Shower Commode Chair with stainless steel frames, 25? tilt range, proprietary Weight Assist Spring System (WASS), 20"H Multi-Position Back, tension-adjustable upholstery, head support fixture with small pad, four dual-locking 6" (150mm) casters, flip-up arm supports, foot supports and commode pan. User weight capacity 600 lbs. Shall Include a quantity of one (1) each unless noted otherwise in the description: Z36WR450 Weight Assist Spring System (WASS) with a weight range of: 350-450 lbs (159-205 kg) [for Raz-AT600] Z4CSHD HD Custom Visco Foam Seat - 22"W x 18"D - Left access Z4CSHD-A Custom Visco Seat - HD (Off-Chair Assembly - includes brackets/hardware) [for Raz AT600] - 22"W x 18"D - Right access Z5S22 Symphony Back 22"W (56cm) - Recessed solid back support [Not compatible with 15"H back frames] Z710HD Arm Support Lock Kit HD (pr) [for Raz-AT600/AP600/SP600] Z7FLL Long Molded Flat Armpad - Left (14"L x 3.25"W) [not compatible with Z5BAR10 arms and short reclining 2-pt arm supports] Z7FLR Long Molded Flat Armpad - Right (14"L x 3.25"W) [not compatible with Z5BAR10 arms and short reclining 2-pt arm supports] Z709N Adjustable Foot Supports HD (16"-20.5") (40-52cm) (pr) [for AP600/SP600/AT600] Z7NCS Neoprene Covers for Standard Footplates (pr) Z7OFLM [Quantity of 2] - Offset Foot Support Receiver (ea) - Lateral / Medial 2" offset Z7CSIC26 Calf Strap Snap-On Infection Control - for 26" (66cm) wide chair [not compatible with Z7FB] Z7HSTL Head Support w/ Large Pad [12" x 6" (30cm x 15cm)] Z7LTS2L Lateral Thoracic Support w/ Large Depth-Adjustable Pad - Left [6.5" x 4" ] Z7LTS2R Lateral Thoracic Support w/ Large Depth-Adjustable Pad - Right [6.5" x 4"] Z7LGT2L Leg Adductor w/ Large Adjustable Pad - Left [6.5" x 4"] [for Raz-CAT/AT/AT600] Z7LGT2R Leg Adductor w/ Large Adjustable Pad - Right [6.5" x 4"] [for Raz-CAT/AT/AT600] ZPBICXLHDT Pelvic Belt - Infection Control XLarge 2-piece w/ spacers, mounting plates, side-release buckle [fits seat frame widths 22"-26"] [for Raz-AT600] Z66T6 Anti-Tippers for 6" Casters (pr) installed on rear [for Raz-AT/CAT/AT600] Z675 Directional Caster Lock - fits on left rear caster [facilitates steering] [for Raz-AT/CAT/AT600]
LOCAL STOCK NUMBER: Z36022 0003
1.00
EA
Raz-SP non-standard 20"W (51cm) base frame - Self Propel Mobile Shower Commode Chair with height-adjustable stainless steel frame, 22" or 24" (560mm or 600mm) rear wheels, adjustable axle plate, wheel locks, two dual-locking 5" (125mm) casters, angle adjustable back, foot supports and commode pan. User weight capacity 400 lbs. [Must add Z2SW20 upcharge for custom width]. Shall Include a quantity of one (1) each unless noted otherwise in the description: Z2SW20 Upcharge for custom 20"W frame [for Raz-SP] Z4CS Custom Visco Foam Seat - 20"W x 19"D - Left access Z4CS-A Custom Visco Foam Seat Assembly - 20"W x 19"D - Right access Z51520 Adjusta-Back for non-standard width - 20"W x 20"H (51cmW x 51cmH) with angle/height-adjustable flip-up arm supports and tension-adjustable back upholstery. [Includes Arm Support Lock Kit (Z710)] Z5S20 Symphony Back 20"W (51cm) - Recessed solid back support [Not compatible with 15"H back frames] Z5BAR13 Flip-Up Arm Supports - 13"L (33cm) pad (pr) Z7FLL Long Molded Flat Armpad - Left (14"L x 3.25"W) [not compatible with Z5BAR10 arms and short reclining 2-pt arm supports] Z7FLR Long Molded Flat Armpad - Right (14"L x 3.25"W) [not compatible with Z5BAR10 arms and short reclining 2-pt arm supports] Z614R Rear 24" (600mm) Diameter Wheels w/ Ergonomic Textured Handrims (pr) [for Raz-SP] Z705N Foot Supports w/ standard footplates (pr) [leg lengths 16"-20.5" (40-52cm)] Z7FET2 Foot Support Extension Tubes (pr) [2" longer footrest range] [not compatible with Z7MFX8/Z7ADM/Z7VS/Z7FBAS] Z7NCS Neoprene Covers for Standard Footplates (pr) Z7CSIC20 Calf Strap Snap-On Infection Control - for 20" (51cm) wide chair [not compatible with Z7FB] [for Raz-AP/SP/AT/CAT] Z7LGAS2L Leg Adductor w/ Large Adjustable Pad - Left [6.5" x 4"] [for Raz-AP/SP/AP600/SP600] Z7LGAS2R Leg Adductor w/ Large Adjustable Pad -
LOCAL STOCK NUMBER: Z20020 0004
1.00
EA
Raz-AT non-standard 20"W (51cm) base and seat frame width - Attendant Tilt Mobile Shower Commode Chair with 40? tilt range, height adjustable stainless steel frame, four dual-locking 5"(125mm) casters, head support fixture with small pad, angle adjustable back, foot supports and commode pan. User weight capacity 400. Shall Include a quantity of one (1) each unless noted otherwise in the description: Z3SW20 Upcharge for custom 20"W seat and base frame [for Raz-AT] Z4CS Custom Visco Foam Seat - 20"W x 19"D - Rear access Z520ATR20 Reclining Adjusta-Back for non-standard width - 20"W x 24"H (51cmW x 61cmH) with 30 degrees of recline, padded flip-up / 2-point reclining arm supports and tension-adjustable back upholstery. [Tilt is limited to 25degrees][for Raz-AT] Z5BAR13 Flip-Up Arm Supports - 13"L (33cm) pad (pr) Z7FLL Long Molded Flat Armpad - Left (14"L x 3.25"W) [not compatible with Z5BAR10 arms and short reclining 2-pt arm supports] Z7FLR Long Molded Flat Armpad - Right (14"L x 3.25"W) [not compatible with Z5BAR10 arms and short reclining 2-pt arm supports] Z7ELROFL Forward Offset Elevating Leg Support - Left (includes Z7ADM) [compatible with seats that extend past front of frame by up to 2"] Z7ELROFR Forward Offset Elevating Leg Support - Right (includes Z7ADM) [compatible with seats that extend past front of frame by up to 2"] Z7NCA Neoprene Covers for Angle/Depth Adjustable Molded Footplates (pr) Z7HSTL Head Support w/ Large Pad [12" x 6" (30cm x 15cm)] Z7LTS2L Lateral Thoracic Support w/ Large Depth-Adjustable Pad - Left [6.5" x 4" ] Z7LTS2R Lateral Thoracic Support w/ Large Depth-Adjustable Pad - Right [6.5" x 4"] Z7LGT2L Leg Adductor w/ Large Adjustable Pad - Left [6.5" x 4"] [for Raz-CAT/AT/AT600] Z7LGT2R Leg Adductor w/ Large Adjustable Pad - Right [6.5" x 4"] [for Raz-CAT/AT/AT600] ZCBICL Chest Belt - Infection Control Large 1-piece w/ side-release buckle [chest belt must never be used without a pelvic belt] [65" Max Length - fits back widths 18"-22"] ZPBICL Pelvic Belt - Infection Control Large 2-piece w/ side-release buckle [fits seat frame widths 18"-22"]
LOCAL STOCK NUMBER: Z300S20 0005
1.00
EA
Raz-AT non-standard 20"W (51cm) base and seat frame width - Attendant Tilt Mobile Shower Commode Chair with 40? tilt range, height adjustable stainless steel frame, four dual-locking 5" (125mm) casters, head support fixture with small pad, angle adjustable back, foot supports and commode pan. User weight capacity 400 lbs. [Must add Z3SW20 upcharge for custom width]. Shall Include a quantity of one (1) each unless noted otherwise in the description: Z3SW20 Upcharge for custom 20"W seat and base frame [for Raz-AT] Z4CS Custom Visco Foam Seat - 20"W x 17"D - Left access Z4CS-A Custom Visco Foam Seat Assembly (Off-Chair Assembly - includes brackets/hardware) - 20"W x 17"D - Right access Z51520 Adjusta-Back for non-standard width - 20"W x 20"H (51cmW x 51cmH) with angle/height-adjustable flip-up arm supports and tension-adjustable back upholstery. [Includes Arm Support Lock Kit (Z710)] Z5S20 Symphony Back 20"W (51cm) - Recessed solid back support [Not compatible with 15"H back frames] Z5BAR13 Flip-Up Arm Supports - 13"L (33cm) pad (pr) Z7FLL Long Molded Flat Armpad - Left (14"L x 3.25"W) [not compatible with Z5BAR10 arms and short reclining 2-pt arm supports] Z7FLR Long Molded Flat Armpad - Right (14"L x 3.25"W) [not compatible with Z5BAR10 arms and short reclining 2-pt arm supports] Z705N Foot Supports w/ standard footplates (pr) [leg lengths 16"-20.5" (40-52cm)] Z7FET2 Foot Support Extension Tubes (pr) [2" longer footrest range] [not compatible with Z7MFX8/Z7ADM/Z7VS/Z7FBAS] Z7NCS Neoprene Covers for Standard Footplates (pr) Z7CSIC20 Calf Strap Snap-On Infection Control - for 20" (51cm) wide chair [not compatible with Z7FB] Z7HSTL Head Support w/ Large Pad [12" x 6" (30cm x 15cm)] Z7LTS2L Lateral Thoracic Support w/ Large Depth-Adjustable Pad - Left [6.5" x 4" ] Z7LTS2R Lateral Thoracic Support w/ Large Depth-Adjustable Pad - Right [6.5" x 4"] Z7LGT2L Leg Adductor w/ Large Adjustable Pad - Left [6.5" x 4"] [for Raz-CAT/AT/AT600] Z7LGT2R Leg Adductor w/ Large Adjustable Pad - Right [6.5" x 4"] [for Raz-CAT/AT/AT600] ZCBICL Chest Belt - Infection Control Large 1-piece w/ side-release buckle [chest belt must never be used without a pelvic belt] [65" Max Length - fits back widths 18"-22"] ZPBICL Pelvic Belt - Infection Control Large 2-piece w/ side-release buckle [fits seat frame widths 18"-22"]
LOCAL STOCK NUMBER: Z300S20 0006
1.00
EA
Raz-AT non-standard 20"W (51cm) base and seat frame width - Attendant Tilt Mobile Shower Commode Chair with 40? tilt range, height adjustable stainless steel frame, four dual-locking 5" (125mm) casters, head support fixture with small pad, angle adjustable back, foot supports and commode pan. User weight capacity 400 lbs. [Must add Z3SW20 upcharge for custom width]. Shall Include a quantity of one (1) each unless noted otherwise in the description: Z3SW20 Upcharge for custom 20"W seat and base frame [for Raz-AT] Z4CS Custom Visco Foam Seat - 20"W x 17"D - Rear access Z520ATR20 Reclining Adjusta-Back for non-standard width - 20"W x 24"H (51cmW x 61cmH) with 30 degrees of recline, padded flip-up / 2-point reclining arm supports and tension-adjustable back upholstery. [Tilt is limited to 25 degrees][for Raz-AT] Z5BAR13 Flip-Up Arm Supports - 13"L (33cm) pad (pr) Z7FLL Long Molded Flat Armpad - Left (14"L x 3.25"W) [not compatible with Z5BAR10 arms and short reclining 2-pt arm supports] Z7FLR Long Molded Flat Armpad - Right (14"L x 3.25"W) [not compatible with Z5BAR10 arms and short reclining 2-pt arm supports] Z7ELRL Elevating Leg Support - Left (includes Z7ADM) [compatible with seats that do not extend past front of frame] Z7ELRR Elevating Leg Support - Right (includes Z7ADM) [compatible with seats that do not extend past front of frame] Z7NCA Neoprene Covers for Angle/Depth Adjustable Molded Footplates (pr) Z7HSTL Head Support w/ Large Pad [12" x 6" (30cm x 15cm)] Z7LTS2L Lateral Thoracic Support w/ Large Depth-Adjustable Pad - Left [6.5" x 4" ] Z7LTS2R Lateral Thoracic Support w/ Large Depth-Adjustable Pad - Right [6.5" x 4"] Z7LGT2L Leg Adductor w/ Large Adjustable Pad - Left [6.5" x 4"] [for Raz-CAT/AT/AT600] Z7LGT2R Leg Adductor w/ Large Adjustable Pad - Right [6.5" x 4"] [for Raz-CAT/AT/AT600] ZCBICL Chest Belt - Infection Control Large 1-piece w/ side-release buckle [chest belt must never be used without a pelvic belt] [65" Max Length - fits back widths 18"-22"] ZPBICL Pelvic Belt - Infection Control Large 2-piece w/ side-release buckle [fits seat frame widths 18"-22"]
LOCAL STOCK NUMBER: Z300S20 0007
1.00
EA
Raz-AT standard 18"W (46cm) base and seat frame [will fit over most toilets] - Attendant Tilt Mobile Shower Commode Chair with 40? tilt range, height adjustable stainless steel frame, four dual-locking 5" (125mm) casters, head support fixture with small pad, angle adjustable back, foot supports and commode pan. User weight capacity 400 lbs. Shall Include a quantity of one (1) each unless noted otherwise in the description: Z439LTO Visco-Foam Interface Seat 18"W x 19"D (46cm x 48cm) - Left Access Z439RTO-A Visco-Foam Interface Seat 18"W x 19"D (46cm x 48cm) - Right Access (Off-Chair Assembly - includes brackets/hardware) [for Raz-AP/SP/AT/ART] Z51518 Adjusta-Back for standard width - 18"W x 20"H (46cmW x 51cmH) with angle/height-adjustable flip-up arm supports and tension-adjustable back upholstery. [Includes Arm Support Lock Kit (Z710)] Z5BAR13 Flip-Up Arm Supports - 13"L (33cm) pad (pr) Z705N Foot Supports w/ standard footplates (pr) [leg lengths 16"-20.5" (40-52cm)] Z7OFLM [Quantity of 2] - Offset Foot Support Receiver (ea) - Lateral / Medial 2" offset Z7CSIC22 Calf Strap Snap-On Infection Control - for 22" (56cm) wide chair [not compatible with Z7FB] [for Raz-AP/SP/AT/AP600/SP600/AT600] Z7HSTL Head Support w/ Large Pad [12" x 6" (30cm x 15cm)] Z7LTS1L Lateral Thoracic Support w/ Small Depth-Adjustable Pad - Left [5.25"x 3.25"] Z7LTS1R Lateral Thoracic Support w/ Small Depth-Adjustable Pad - Right [5.25"x 3.25"] Z7LGT2L Leg Adductor w/ Large Adjustable Pad - Left [6.5" x 4"] [for Raz-CAT/AT/AT600] Z7LGT2R Leg Adductor w/ Large Adjustable Pad - Right [6.5" x 4"] [for Raz-CAT/AT/AT600] ZCBICL Chest Belt - Infection Control Large 1-piece w/ side-release buckle [chest belt must never be used without a pelvic belt] [65" Max Length - fits back widths 18"-22"] ZPBICL Pelvic Belt - Infection Control Large 2-piece w/ side-release buckle [fits seat frame widths 18"-22"] Z675 Directional Caster Lock - fits on left rear caster [facilitates steering] [for Raz-AT/CAT/AT600] Z66T5 Anti-Tippers for 5" Casters (pr) installed on rear [for Raz-AT/CAT]
LOCAL STOCK NUMBER: Z300S18 Funding/Req. Number: 1 0008
1.00
EA
Raz-AT standard 18"W (46cm) base and seat frame [will fit over most toilets] - Attendant Tilt Mobile Shower Commode Chair with 40? tilt range, height adjustable stainless steel frame, four dual-locking 5" (125mm) casters, head support fixture with small pad, angle adjustable back, foot supports and commode pan. User weight capacity 400 lbs. Shall Include a quantity of one (1) each unless noted otherwise in the description: Z439RRO Visco-Foam Interface Seat 18"W x 19"D (46cm x 48cm) - Rear Access Z520ATR18 Reclining Adjusta-Back for standard width - 18"W x 24"H (46cmW x 61cmH) with 30 degrees of recline, padded flip-up / 2-point reclining arm supports and tension-adjustable back upholstery. [Tilt is limited to 25 degrees][for Raz-AT] Z5S18 Symphony Back 18"W (46cm) - Recessed solid back support [Not compatible with 15"H back frames] Z7TRL Molded Arm Trough - Left (18.5"L x 4.5"W) [not compatible with Z5BAR10 arms and short reclining 2-ptarm supports] Z7TRR Molded Arm Trough - Right (18.5"L x 4.5"W) [not compatible with Z5BAR10 arms and short reclining 2-pt arm supports] Z7PAML Pivoting Arm Mount - Left [for flip-up Arm Support] [not compatible with Z5BAR10 t ] Z7PAMR Pivoting Arm Mount - Right [for flip-up Arm Support] [not compatible with Z5BAR10 ] Z7ELROFL Forward Offset Elevating Leg Support - Left (includes Z7ADM) [compatible with seats that extend past front of frame by up to 2"] Z7ELROFR Forward Offset Elevating Leg Support - Right (includes Z7ADM) [compatible with seats that extend past front of frame by up to 2"] Z7NCA Neoprene Covers for Angle/Depth Adjustable Molded Footplates (pr) Z7OFLM [Quantity of 2] - Offset Foot Support Receiver (ea) - Lateral / Medial 2" offset Z7HSTL Head Support w/ Large Pad [12" x 6" (30cm x 15cm)] Z7LTS1L Lateral Thoracic Support w/ Small Depth-Adjustable Pad - Left [5.25"x 3.25"] Z7LTS1R Lateral Thoracic Support w/ Small Depth-Adjustable Pad - Right [5.25"x 3.25"] Z7LGT2L Leg Adductor w/ Large Adjustable Pad - Left [6.5" x 4"] [for
LOCAL STOCK NUMBER: Z300S18 0009
1.00
EA
Raz-AT standard 18"W (46cm) base and seat frame [will fit over most toilets] - Attendant Tilt Mobile Shower Commode Chair with 40? tilt range, height adjustable stainless steel frame, four dual-locking 5" (125mm) casters, head support fixture with small pad, angle adjustable back, foot supports and commode pan. User weight capacity 400 lbs. Shall Include a quantity of one (1) each unless noted otherwise in the description: Z436LTO Visco-Foam Interface Seat 18"W x 16"D (46cm x 41cm) - Left Access Z436RTO-A Visco-Foam Interface Seat 18"W x 16"D (46cm x 41cm) - Right Access (Off-Chair Assembly - includes brackets/hardware) Z51518 Adjusta-Back for standard width - 18"W x 20"H (46cmW x 51cmH) with angle/height-adjustable flip-up arm supports and tension-adjustable back upholstery. [Includes Arm Support Lock Kit (Z710)] Z5BAR13 Flip-Up Arm Supports - 13"L (33cm) pad (pr) Z705N Foot Supports w/ standard footplates (pr) [leg lengths 16"-20.5" (40-52cm)] Z7OFLM [Quantity of 2] - Offset Foot Support Receiver (ea) - Lateral / Medial 2" offset Z7CSIC22 Calf Strap Snap-On Infection Control - for 22" (56cm) wide chair [not compatible with Z7FB] [for Raz-AP/SP/AT/AP600/SP600/AT600] Z7HSTL Head Support w/ Large Pad [12" x 6" (30cm x 15cm)] Z7LTS1L Lateral Thoracic Support w/ Small Depth-Adjustable Pad - Left [5.25"x 3.25"] Z7LTS1R Lateral Thoracic Support w/ Small Depth-Adjustable Pad - Right [5.25"x 3.25"] Z7LGT2L Leg Adductor w/ Large Adjustable Pad - Left [6.5" x 4"] [for Raz-CAT/AT/AT600] Z7LGT2R Leg Adductor w/ Large Adjustable Pad - Right [6.5" x 4"] [for Raz-CAT/AT/AT600] ZCBICL Chest Belt - Infection Control Large 1-piece w/ side-release buckle [chest belt must never be used without a pelvic belt] [65" Max Length - fits back widths 18"-22"] ZPBICL Pelvic Belt - Infection Control Large 2-piece w/ side-release buckle [fits seat frame widths 18"-22"] Z675 Directional Caster Lock - fits on left rear caster [facilitates steering] [for Raz-AT/CAT/AT600] Z66T5 Anti-Tippers for 5" Casters (pr) installed on rear [for Raz-AT/CAT]
LOCAL STOCK NUMBER: Z300S18 0010
1.00
EA
10 Raz-SP standard 18"W (46cm) base frame [will fit over most toilets] - Self Propel Mobile Shower Commode Chair with height-adjustable stainless steel frame, 22" or 24" (560mm or 600mm) rear wheels, adjustable axle plate, wheel locks, two dual-locking 5" (125mm) casters, angle adjustable back, foot supports and commode pan. User weight capacity 400 lbs. Shall Include a quantity of one (1) each unless noted otherwise in the description: Z436LTO Visco-Foam Interface Seat 18"W x 16"D (46cm x 41cm) - Left Access Z508 Fixed Back 18"W x 18"H (46cmW x 46cmH) - Includes molded vinyl back support, fixed-height flip-up padded arm supports, back angle adjustment (90?/97?) with cane-style posts. Arm Support Lock Kit (Z710) is not included Z5BU1818 Tension-Adjustable Back Upholstery 18"W x 18"W (Use on Z508) Z710 Arm Support Lock Kit (pr) [for non-HD backs] [for Raz-AP/SP/AT/CAT/ART/Z?m] Z5BAR13 Flip-Up Arm Supports - 13"L (33cm) pad (pr) Z612R Rear 22" (560mm) Diameter Wheels w/ Ergonomic Textured Handrims (pr) [for Raz-SP] Z622VHR Vinyl-Coated Handrims for 22" (560mm) Rear Wheels (pr) [for Raz-SP] Z705N Foot Supports w/ standard footplates (pr) [leg lengths 16"-20.5" (40-52cm)] Z708ADJ Adjustable Heel Loops - (pr) [not compatible with Z7VS/Z7FB] Z7NCS Neoprene Covers for Standard Footplates (pr) Z66SPR Anti-Tippers - Telescoping for Regular Frame (pr) [rear only for Raz-SP/SP600] Z6WLE Wheel Lock w/ Extension Tubes (pr) [for Raz SP/SP600] Z7LGAS1L Leg Adductor w/ Small Adjustable Pad - Left [5.25"x 3.25"] [for Raz-AP/SP] Z7LGAS1R Leg Adductor w/ Small Adjustable Pad - Right [5.25"x 3.25"] [for Raz-AP/SP] ZCBICL Chest Belt - Infection Control Large 1-piece w/ side-release buckle [chest belt must never be used without a pelvic belt] [65" Max Length - fits back widths 18"-22"] ZPBICL Pelvic Belt - Infection Control Large 2-piece w/ side-release buckle [fits seat frame widths 18"-22"]
LOCAL STOCK NUMBER: Z20018 0011
1.00
EA
Raz-SP standard 18"W (46cm) base frame [will fit over most toilets] - Self Propel Mobile Shower Commode Chair with height-adjustable stainless steel frame, 22" or 24" (560mm or 600mm) rear wheels, adjustable axle plate, wheel locks, two dual-locking 5" (125mm) casters, angle adjustable back, foot supports and commode pan. User weight capacity 400 lbs. Shall Include a quantity of one (1) each unless noted otherwise in the description: Z436RTO Visco-Foam Interface Seat 18"W x 16"D (46cm x 41cm) - Right Access Z508 Fixed Back 18"W x 18"H (46cmW x 46cmH) - Includes molded vinyl back support, fixed-height flip-up padded arm supports, back angle adjustment (90?/97?) with cane-style posts. Arm Support Lock Kit (Z710) is not included Z5S18 Symphony Back 18"W (46cm) - Recessed solid back support [Not compatible with 15"H back frames] Z710 Arm Support Lock Kit (pr) [for non-HD backs] [for Raz-AP/SP/AT/CAT/ART/Z?m] Z5BAR13 Flip-Up Arm Supports - 13"L (33cm) pad (pr) Z612R Rear 22" (560mm) Diameter Wheels w/ Ergonomic Textured Handrims (pr) [for Raz-SP] Z622VHR Vinyl-Coated Handrims for 22" (560mm) Rear Wheels (pr) [for Raz-SP] Z705N Foot Supports w/ standard footplates (pr) [leg lengths 16"-20.5" (40-52cm)] Z708ADJ Adjustable Heel Loops - (pr) [not compatible with Z7VS/Z7FB] Z7NCS Neoprene Covers for Standard Footplates (pr) Z66SPR Anti-Tippers - Telescoping for Regular Frame (pr) [rear only for Raz-SP/SP600] Z6WLE Wheel Lock w/ Extension Tubes (pr) [for Raz SP/SP600] Z7LGAS1L Leg Adductor w/ Small Adjustable Pad - Left [5.25"x 3.25"] [for Raz-AP/SP] Z7LGAS1R Leg Adductor w/ Small Adjustable Pad - Right [5.25"x 3.25"] [for Raz-AP/SP] ZCBICL Chest Belt - Infection Control Large 1-piece w/ side-release buckle [chest belt must never be used without a pelvic belt] [65" Max Length - fits back widths 18"-22"] ZPBICL Pelvic Belt - Infection Control Large 2-piece w/ side-release buckle [fits seat frame widths 18"-22"]
LOCAL STOCK NUMBER: Z20018 0012
1.00
EA
Raz-SP standard 18"W (46cm) base frame [will fit over most toilets] - Self Propel Mobile Shower Commode Chair with height-adjustable stainless steel frame, 22" or 24" (560mm or 600mm) rear wheels, adjustable axle plate, wheel locks, two dual-locking 5" (125mm) casters, angle adjustable back, foot supports and commode pan. User weight capacity 400 lbs. Shall Include a quantity of one (1) each unless noted otherwise in the description: Z439LTO Visco-Foam Interface Seat 18"W x 19"D (46cm x 48cm) - Left Access Z439RTO-A Visco-Foam Interface Seat 18"W x 19"D (46cm x 48cm) - Right Access (Off-Chair Assembly - includes brackets/hardware) [for Raz-AP/SP/AT/ART] Z508 Fixed Back 18"W x 18"H (46cmW x 46cmH) - Includes molded vinyl back support, fixed-height flip-up padded arm supports, back angle adjustment (90?/97?) with cane-style posts. Arm Support Lock Kit (Z710) is not included Z5BU1818 Tension-Adjustable Back Upholstery 18"W x 18"W (Useon Z508) Z710 Arm Support Lock Kit (pr) [for non-HD backs] [for Raz-AP/SP/AT/CAT/ART/Z?m] Z5BAR13 Flip-Up Arm Supports - 13"L (33cm) pad (pr) Z612R Rear 22" (560mm) Diameter Wheels w/ Ergonomic Textured Handrims (pr) [for Raz-SP] Z622VHR Vinyl-Coated Handrims for 22" (560mm) Rear Wheels (pr) [for Raz-SP] Z705N Foot Supports w/ standard footplates (pr) [leg lengths 16"-20.5" (40-52cm)] Z7FET2 Foot Support Extension Tubes (pr) [2" longer footrest range] [not compatible with Z7MFX8/Z7ADM/Z7VS/Z7FBAS] Z708ADJ Adjustable Heel Loops - (pr) [not compatible with Z7VS/Z7FB] Z7NCS Neoprene Covers for Standard Footplates (pr) Z66SPR Anti-Tippers - Telescoping for Regular Frame (pr) [rear only for Raz-SP/SP600] Z6WLE Wheel Lock w/ Extension Tubes (pr) [for Raz SP/SP600] Z7LGAS1L Leg Adductor w/ Small Adjustable Pad - Left [5.25"x 3.25"] [for Raz-AP/SP] Z7LGAS1R Leg Adductor w/ Small Adjustable Pad - Right [5.25"x 3.25"] [for Raz-AP/SP] ZCBICL Chest Belt - Infection Control Large 1-piece w/ side-release buckle [chest belt must never be used without a pelvic belt] [65" Max Length - fits back widths 18"-22"] ZPBICL Pelvic Belt - Infection Control Large 2-piece w/ side-release buckle [fits seat frame widths 18"-22"]
LOCAL STOCK NUMBER: Z20018 0013
1.00
EA
Raz-SP standard 18"W (46cm) base frame [will fit over most toilets] - Self Propel Mobile Shower Commode Chair with height-adjustable stainless steel frame, 22" or 24" (560mm or 600mm) rear wheels, adjustable axle plate, wheel locks, two dual-locking 5" (125mm) casters, angle adjustable back, foot supports and commode pan. User weight capacity 400 lbs. Shall Include a quantity of one (1) each unless noted otherwise in the description: Z439RRO Visco-Foam Interface Seat 18"W x 19"D (46cm x 48cm) - Rear Access Z508 Fixed Back 18"W x 18"H (46cmW x 46cmH) - Includes molded vinyl back support, fixed-height flip-up padded arm supports, back angle adjustment (90?/97?) with cane-style posts. Arm Support Lock Kit (Z710) is not included Z5S18 Symphony Back 18"W (46cm) - Recessed solid back support [Not compatible with 15"H back frames] Z710 Arm Support Lock Kit (pr) [for non-HD backs] [for Raz-AP/SP/AT/CAT/ART/Z?m] Z5BAR13 Flip-Up Arm Supports - 13"L (33cm) pad (pr) Z612R Rear 22" (560mm) Diameter Wheels w/ Ergonomic Textured Handrims (pr) [for Raz-SP] Z622VHR Vinyl-Coated Handrims for 22" (560mm) Rear Wheels (pr) [for Raz-SP] Z705N Foot Supports w/ standard footplates (pr) [leg lengths 16"-20.5" (40-52cm)] Z7FET2 Foot Support Extension Tubes (pr) [2" longer footrest range] [not compatible with Z7MFX8/Z7ADM/Z7VS/Z7FBAS] Z708ADJ Adjustable Heel Loops - (pr) [not compatible with Z7VS/Z7FB] Z7NCS Neoprene Covers for Standard Footplates (pr) Z66SPR Anti-Tippers - Telescoping for Regular Frame (pr) [rear only for Raz-SP/SP600] Z6WLE Wheel Lock w/ Extension Tubes (pr) [for Raz SP/SP600] Z7LGAS1L Leg Adductor w/ Small Adjustable Pad - Left [5.25"x 3.25"] [for Raz-AP/SP] Z7LGAS1R Leg Adductor w/ Small Adjustable Pad - Right [5.25"x 3.25"] [for Raz-AP/SP] ZCBICL Chest Belt - Infection Control Large 1-piece w/ side-release buckle [chest belt must never be used without a pelvic belt] [65" Max Length - fits back widths 18"-22"] ZPBICL Pelvic Belt - Infection Control Large 2-piece w/ side-release buckle [fits seat frame widths 18"-22"]
LOCAL STOCK NUMBER: Z20018
Please title email with Solicitation Number and Proposal Submission. Offers received after the exact time specified in the solicitation are considered late and may not be considered if the action would not unduly delay the acquisition or are deemed to be in the best interest of the Government.
Questions: All questions must be received by Thursday Jan 12, 2023 at 5PM CST. All questions submitted for this solicitation must be electronically sent to the following email address: to Matt Lee; matthew.lee5@va.gov. Please title email with Solicitation Number Questions/Proposal Submission. Questions received after the stated date and time, may be addressed at the discretion of the Contracting Officer.
Vendors are asked to please provide negative responses and referenced as No Bid .Â
ITEM NUMBER
DESCRIPTION OF SUPPLIES/SERVICES
QUANTITY
UNIT
UNIT PRICE
AMOUNT
0001
1.00
EA
Raz-AT600 - 22"W (56cm) frame. Heavy Duty Attendant Tilt Mobile Shower Commode Chair with stainless steel frames, 25? tilt range, proprietary Weight Assist Spring System (WASS), 20"H Multi-Position Back, tension-adjustable upholstery, head support fixture with small pad, four dual-locking 6" (150mm) casters, flip-up arm supports, foot supports and commode pan. User weight capacity 600 lbs. Shall Include a quantity of one (1) each unless noted otherwise in the description: Z36WR450 Weight Assist Spring System (WASS) with a weight range of: 350-450 lbs (159-205 kg) [for Raz-AT600] Z4CSHD HD Custom Visco Foam Seat - 22"W x 18"D - Left access Z4CSHD-A Custom Visco Seat - HD (Off-Chair Assembly - includes brackets/hardware) [for Raz AT600] - 22"W x 18"D - Right access Z5S22 Symphony Back 22"W (56cm) - Recessed solid back support [Not compatible with 15"H back frames] Z710HD Arm Support Lock Kit HD (pr) [for Raz-AT600/AP600/SP600] Z7FLL Long Molded Flat Armpad - Left (14"L x 3.25"W) [not compatible with Z5BAR10 arms and short reclining 2-pt arm supports] Z7FLR Long Molded Flat Armpad - Right (14"L x 3.25"W) [not compatible with Z5BAR10 arms and short reclining 2-pt arm supports] Z709N Adjustable Foot Supports HD (16"-20.5") (40-52cm) (pr) [for AP600/SP600/AT600] Z7NCS Neoprene Covers for Standard Footplates (pr) Z7OFLM [Quantity of 2] - Offset Foot Support Receiver (ea) - Lateral / Medial 2" offset Z7CSIC26 Calf Strap Snap-On Infection Control - for 26" (66cm) wide chair [not compatible with Z7FB] Z7HSTL Head Support w/ Large Pad [12" x 6" (30cm x 15cm)] Z7LTS2L Lateral Thoracic Support w/ Large Depth-Adjustable Pad - Left [6.5" x 4" ] Z7LTS2R Lateral Thoracic Support w/ Large Depth-Adjustable Pad - Right [6.5" x 4"] Z7LGT2L Leg Adductor w/ Large Adjustable Pad - Left [6.5" x 4"] [for Raz-CAT/AT/AT600] Z7LGT2R Leg Adductor w/ Large Adjustable Pad - Right [6.5" x 4"] [for Raz-CAT/AT/AT600] ZPBICXLHDT Pelvic Belt - Infection Control XLarge 2-piece w/ spacers, mounting plates, side-release buckle [fits seat frame widths 22"-26"] [for Raz-AT600] Z66T6 Anti-Tippers for 6" Casters (pr) installed on rear [for Raz-AT/CAT/AT600] Z675 Directional Caster Lock - fits on left rear caster [facilitates steering] [for Raz-AT/CAT/AT600]
LOCAL STOCK NUMBER: Z36022 0002
1.00
EA
Raz-AT600 - "W (56cm) frame. Heavy Duty Attendant Tilt Mobile Shower Commode Chair with stainless steel frames, 25? tilt range, proprietary Weight Assist Spring System (WASS), 20"H Multi-Position Back, tension-adjustable upholstery, head support fixture with small pad, four dual-locking 6" (150mm) casters, flip-up arm supports, foot supports and commode pan. User weight capacity 600 lbs. Shall Include a quantity of one (1) each unless noted otherwise in the description: Z36WR450 Weight Assist Spring System (WASS) with a weight range of: 350-450 lbs (159-205 kg) [for Raz-AT600] Z4CSHD HD Custom Visco Foam Seat - 22"W x 18"D - Left access Z4CSHD-A Custom Visco Seat - HD (Off-Chair Assembly - includes brackets/hardware) [for Raz AT600] - 22"W x 18"D - Right access Z5S22 Symphony Back 22"W (56cm) - Recessed solid back support [Not compatible with 15"H back frames] Z710HD Arm Support Lock Kit HD (pr) [for Raz-AT600/AP600/SP600] Z7FLL Long Molded Flat Armpad - Left (14"L x 3.25"W) [not compatible with Z5BAR10 arms and short reclining 2-pt arm supports] Z7FLR Long Molded Flat Armpad - Right (14"L x 3.25"W) [not compatible with Z5BAR10 arms and short reclining 2-pt arm supports] Z709N Adjustable Foot Supports HD (16"-20.5") (40-52cm) (pr) [for AP600/SP600/AT600] Z7NCS Neoprene Covers for Standard Footplates (pr) Z7OFLM [Quantity of 2] - Offset Foot Support Receiver (ea) - Lateral / Medial 2" offset Z7CSIC26 Calf Strap Snap-On Infection Control - for 26" (66cm) wide chair [not compatible with Z7FB] Z7HSTL Head Support w/ Large Pad [12" x 6" (30cm x 15cm)] Z7LTS2L Lateral Thoracic Support w/ Large Depth-Adjustable Pad - Left [6.5" x 4" ] Z7LTS2R Lateral Thoracic Support w/ Large Depth-Adjustable Pad - Right [6.5" x 4"] Z7LGT2L Leg Adductor w/ Large Adjustable Pad - Left [6.5" x 4"] [for Raz-CAT/AT/AT600] Z7LGT2R Leg Adductor w/ Large Adjustable Pad - Right [6.5" x 4"] [for Raz-CAT/AT/AT600] ZPBICXLHDT Pelvic Belt - Infection Control XLarge 2-piece w/ spacers, mounting plates, side-release buckle [fits seat frame widths 22"-26"] [for Raz-AT600] Z66T6 Anti-Tippers for 6" Casters (pr) installed on rear [for Raz-AT/CAT/AT600] Z675 Directional Caster Lock - fits on left rear caster [facilitates steering] [for Raz-AT/CAT/AT600]
LOCAL STOCK NUMBER: Z36022 0003
1.00
EA
Raz-SP non-standard 20"W (51cm) base frame - Self Propel Mobile Shower Commode Chair with height-adjustable stainless steel frame, 22" or 24" (560mm or 600mm) rear wheels, adjustable axle plate, wheel locks, two dual-locking 5" (125mm) casters, angle adjustable back, foot supports and commode pan. User weight capacity 400 lbs. [Must add Z2SW20 upcharge for custom width]. Shall Include a quantity of one (1) each unless noted otherwise in the description: Z2SW20 Upcharge for custom 20"W frame [for Raz-SP] Z4CS Custom Visco Foam Seat - 20"W x 19"D - Left access Z4CS-A Custom Visco Foam Seat Assembly - 20"W x 19"D - Right access Z51520 Adjusta-Back for non-standard width - 20"W x 20"H (51cmW x 51cmH) with angle/height-adjustable flip-up arm supports and tension-adjustable back upholstery. [Includes Arm Support Lock Kit (Z710)] Z5S20 Symphony Back 20"W (51cm) - Recessed solid back support [Not compatible with 15"H back frames] Z5BAR13 Flip-Up Arm Supports - 13"L (33cm) pad (pr) Z7FLL Long Molded Flat Armpad - Left (14"L x 3.25"W) [not compatible with Z5BAR10 arms and short reclining 2-pt arm supports] Z7FLR Long Molded Flat Armpad - Right (14"L x 3.25"W) [not compatible with Z5BAR10 arms and short reclining 2-pt arm supports] Z614R Rear 24" (600mm) Diameter Wheels w/ Ergonomic Textured Handrims (pr) [for Raz-SP] Z705N Foot Supports w/ standard footplates (pr) [leg lengths 16"-20.5" (40-52cm)] Z7FET2 Foot Support Extension Tubes (pr) [2" longer footrest range] [not compatible with Z7MFX8/Z7ADM/Z7VS/Z7FBAS] Z7NCS Neoprene Covers for Standard Footplates (pr) Z7CSIC20 Calf Strap Snap-On Infection Control - for 20" (51cm) wide chair [not compatible with Z7FB] [for Raz-AP/SP/AT/CAT] Z7LGAS2L Leg Adductor w/ Large Adjustable Pad - Left [6.5" x 4"] [for Raz-AP/SP/AP600/SP600] Z7LGAS2R Leg Adductor w/ Large Adjustable Pad -
LOCAL STOCK NUMBER: Z20020 0004
1.00
EA
Raz-AT non-standard 20"W (51cm) base and seat frame width - Attendant Tilt Mobile Shower Commode Chair with 40? tilt range, height adjustable stainless steel frame, four dual-locking 5"(125mm) casters, head support fixture with small pad, angle adjustable back, foot supports and commode pan. User weight capacity 400. Shall Include a quantity of one (1) each unless noted otherwise in the description: Z3SW20 Upcharge for custom 20"W seat and base frame [for Raz-AT] Z4CS Custom Visco Foam Seat - 20"W x 19"D - Rear access Z520ATR20 Reclining Adjusta-Back for non-standard width - 20"W x 24"H (51cmW x 61cmH) with 30 degrees of recline, padded flip-up / 2-point reclining arm supports and tension-adjustable back upholstery. [Tilt is limited to 25degrees][for Raz-AT] Z5BAR13 Flip-Up Arm Supports - 13"L (33cm) pad (pr) Z7FLL Long Molded Flat Armpad - Left (14"L x 3.25"W) [not compatible with Z5BAR10 arms and short reclining 2-pt arm supports] Z7FLR Long Molded Flat Armpad - Right (14"L x 3.25"W) [not compatible with Z5BAR10 arms and short reclining 2-pt arm supports] Z7ELROFL Forward Offset Elevating Leg Support - Left (includes Z7ADM) [compatible with seats that extend past front of frame by up to 2"] Z7ELROFR Forward Offset Elevating Leg Support - Right (includes Z7ADM) [compatible with seats that extend past front of frame by up to 2"] Z7NCA Neoprene Covers for Angle/Depth Adjustable Molded Footplates (pr) Z7HSTL Head Support w/ Large Pad [12" x 6" (30cm x 15cm)] Z7LTS2L Lateral Thoracic Support w/ Large Depth-Adjustable Pad - Left [6.5" x 4" ] Z7LTS2R Lateral Thoracic Support w/ Large Depth-Adjustable Pad - Right [6.5" x 4"] Z7LGT2L Leg Adductor w/ Large Adjustable Pad - Left [6.5" x 4"] [for Raz-CAT/AT/AT600] Z7LGT2R Leg Adductor w/ Large Adjustable Pad - Right [6.5" x 4"] [for Raz-CAT/AT/AT600] ZCBICL Chest Belt - Infection Control Large 1-piece w/ side-release buckle [chest belt must never be used without a pelvic belt] [65" Max Length - fits back widths 18"-22"] ZPBICL Pelvic Belt - Infection Control Large 2-piece w/ side-release buckle [fits seat frame widths 18"-22"]
LOCAL STOCK NUMBER: Z300S20 0005
1.00
EA
Raz-AT non-standard 20"W (51cm) base and seat frame width - Attendant Tilt Mobile Shower Commode Chair with 40? tilt range, height adjustable stainless steel frame, four dual-locking 5" (125mm) casters, head support fixture with small pad, angle adjustable back, foot supports and commode pan. User weight capacity 400 lbs. [Must add Z3SW20 upcharge for custom width]. Shall Include a quantity of one (1) each unless noted otherwise in the description: Z3SW20 Upcharge for custom 20"W seat and base frame [for Raz-AT] Z4CS Custom Visco Foam Seat - 20"W x 17"D - Left access Z4CS-A Custom Visco Foam Seat Assembly (Off-Chair Assembly - includes brackets/hardware) - 20"W x 17"D - Right access Z51520 Adjusta-Back for non-standard width - 20"W x 20"H (51cmW x 51cmH) with angle/height-adjustable flip-up arm supports and tension-adjustable back upholstery. [Includes Arm Support Lock Kit (Z710)] Z5S20 Symphony Back 20"W (51cm) - Recessed solid back support [Not compatible with 15"H back frames] Z5BAR13 Flip-Up Arm Supports - 13"L (33cm) pad (pr) Z7FLL Long Molded Flat Armpad - Left (14"L x 3.25"W) [not compatible with Z5BAR10 arms and short reclining 2-pt arm supports] Z7FLR Long Molded Flat Armpad - Right (14"L x 3.25"W) [not compatible with Z5BAR10 arms and short reclining 2-pt arm supports] Z705N Foot Supports w/ standard footplates (pr) [leg lengths 16"-20.5" (40-52cm)] Z7FET2 Foot Support Extension Tubes (pr) [2" longer footrest range] [not compatible with Z7MFX8/Z7ADM/Z7VS/Z7FBAS] Z7NCS Neoprene Covers for Standard Footplates (pr) Z7CSIC20 Calf Strap Snap-On Infection Control - for 20" (51cm) wide chair [not compatible with Z7FB] Z7HSTL Head Support w/ Large Pad [12" x 6" (30cm x 15cm)] Z7LTS2L Lateral Thoracic Support w/ Large Depth-Adjustable Pad - Left [6.5" x 4" ] Z7LTS2R Lateral Thoracic Support w/ Large Depth-Adjustable Pad - Right [6.5" x 4"] Z7LGT2L Leg Adductor w/ Large Adjustable Pad - Left [6.5" x 4"] [for Raz-CAT/AT/AT600] Z7LGT2R Leg Adductor w/ Large Adjustable Pad - Right [6.5" x 4"] [for Raz-CAT/AT/AT600] ZCBICL Chest Belt - Infection Control Large 1-piece w/ side-release buckle [chest belt must never be used without a pelvic belt] [65" Max Length - fits back widths 18"-22"] ZPBICL Pelvic Belt - Infection Control Large 2-piece w/ side-release buckle [fits seat frame widths 18"-22"]
LOCAL STOCK NUMBER: Z300S20 0006
1.00
EA
Raz-AT non-standard 20"W (51cm) base and seat frame width - Attendant Tilt Mobile Shower Commode Chair with 40? tilt range, height adjustable stainless steel frame, four dual-locking 5" (125mm) casters, head support fixture with small pad, angle adjustable back, foot supports and commode pan. User weight capacity 400 lbs. [Must add Z3SW20 upcharge for custom width]. Shall Include a quantity of one (1) each unless noted otherwise in the description: Z3SW20 Upcharge for custom 20"W seat and base frame [for Raz-AT] Z4CS Custom Visco Foam Seat - 20"W x 17"D - Rear access Z520ATR20 Reclining Adjusta-Back for non-standard width - 20"W x 24"H (51cmW x 61cmH) with 30 degrees of recline, padded flip-up / 2-point reclining arm supports and tension-adjustable back upholstery. [Tilt is limited to 25 degrees][for Raz-AT] Z5BAR13 Flip-Up Arm Supports - 13"L (33cm) pad (pr) Z7FLL Long Molded Flat Armpad - Left (14"L x 3.25"W) [not compatible with Z5BAR10 arms and short reclining 2-pt arm supports] Z7FLR Long Molded Flat Armpad - Right (14"L x 3.25"W) [not compatible with Z5BAR10 arms and short reclining 2-pt arm supports] Z7ELRL Elevating Leg Support - Left (includes Z7ADM) [compatible with seats that do not extend past front of frame] Z7ELRR Elevating Leg Support - Right (includes Z7ADM) [compatible with seats that do not extend past front of frame] Z7NCA Neoprene Covers for Angle/Depth Adjustable Molded Footplates (pr) Z7HSTL Head Support w/ Large Pad [12" x 6" (30cm x 15cm)] Z7LTS2L Lateral Thoracic Support w/ Large Depth-Adjustable Pad - Left [6.5" x 4" ] Z7LTS2R Lateral Thoracic Support w/ Large Depth-Adjustable Pad - Right [6.5" x 4"] Z7LGT2L Leg Adductor w/ Large Adjustable Pad - Left [6.5" x 4"] [for Raz-CAT/AT/AT600] Z7LGT2R Leg Adductor w/ Large Adjustable Pad - Right [6.5" x 4"] [for Raz-CAT/AT/AT600] ZCBICL Chest Belt - Infection Control Large 1-piece w/ side-release buckle [chest belt must never be used without a pelvic belt] [65" Max Length - fits back widths 18"-22"] ZPBICL Pelvic Belt - Infection Control Large 2-piece w/ side-release buckle [fits seat frame widths 18"-22"]
LOCAL STOCK NUMBER: Z300S20 0007
1.00
EA
Raz-AT standard 18"W (46cm) base and seat frame [will fit over most toilets] - Attendant Tilt Mobile Shower Commode Chair with 40? tilt range, height adjustable stainless steel frame, four dual-locking 5" (125mm) casters, head support fixture with small pad, angle adjustable back, foot supports and commode pan. User weight capacity 400 lbs. Shall Include a quantity of one (1) each unless noted otherwise in the description: Z439LTO Visco-Foam Interface Seat 18"W x 19"D (46cm x 48cm) - Left Access Z439RTO-A Visco-Foam Interface Seat 18"W x 19"D (46cm x 48cm) - Right Access (Off-Chair Assembly - includes brackets/hardware) [for Raz-AP/SP/AT/ART] Z51518 Adjusta-Back for standard width - 18"W x 20"H (46cmW x 51cmH) with angle/height-adjustable flip-up arm supports and tension-adjustable back upholstery. [Includes Arm Support Lock Kit (Z710)] Z5BAR13 Flip-Up Arm Supports - 13"L (33cm) pad (pr) Z705N Foot Supports w/ standard footplates (pr) [leg lengths 16"-20.5" (40-52cm)] Z7OFLM [Quantity of 2] - Offset Foot Support Receiver (ea) - Lateral / Medial 2" offset Z7CSIC22 Calf Strap Snap-On Infection Control - for 22" (56cm) wide chair [not compatible with Z7FB] [for Raz-AP/SP/AT/AP600/SP600/AT600] Z7HSTL Head Support w/ Large Pad [12" x 6" (30cm x 15cm)] Z7LTS1L Lateral Thoracic Support w/ Small Depth-Adjustable Pad - Left [5.25"x 3.25"] Z7LTS1R Lateral Thoracic Support w/ Small Depth-Adjustable Pad - Right [5.25"x 3.25"] Z7LGT2L Leg Adductor w/ Large Adjustable Pad - Left [6.5" x 4"] [for Raz-CAT/AT/AT600] Z7LGT2R Leg Adductor w/ Large Adjustable Pad - Right [6.5" x 4"] [for Raz-CAT/AT/AT600] ZCBICL Chest Belt - Infection Control Large 1-piece w/ side-release buckle [chest belt must never be used without a pelvic belt] [65" Max Length - fits back widths 18"-22"] ZPBICL Pelvic Belt - Infection Control Large 2-piece w/ side-release buckle [fits seat frame widths 18"-22"] Z675 Directional Caster Lock - fits on left rear caster [facilitates steering] [for Raz-AT/CAT/AT600] Z66T5 Anti-Tippers for 5" Casters (pr) installed on rear [for Raz-AT/CAT]
LOCAL STOCK NUMBER: Z300S18 Funding/Req. Number: 1 0008
1.00
EA
Raz-AT standard 18"W (46cm) base and seat frame [will fit over most toilets] - Attendant Tilt Mobile Shower Commode Chair with 40? tilt range, height adjustable stainless steel frame, four dual-locking 5" (125mm) casters, head support fixture with small pad, angle adjustable back, foot supports and commode pan. User weight capacity 400 lbs. Shall Include a quantity of one (1) each unless noted otherwise in the description: Z439RRO Visco-Foam Interface Seat 18"W x 19"D (46cm x 48cm) - Rear Access Z520ATR18 Reclining Adjusta-Back for standard width - 18"W x 24"H (46cmW x 61cmH) with 30 degrees of recline, padded flip-up / 2-point reclining arm supports and tension-adjustable back upholstery. [Tilt is limited to 25 degrees][for Raz-AT] Z5S18 Symphony Back 18"W (46cm) - Recessed solid back support [Not compatible with 15"H back frames] Z7TRL Molded Arm Trough - Left (18.5"L x 4.5"W) [not compatible with Z5BAR10 arms and short reclining 2-ptarm supports] Z7TRR Molded Arm Trough - Right (18.5"L x 4.5"W) [not compatible with Z5BAR10 arms and short reclining 2-pt arm supports] Z7PAML Pivoting Arm Mount - Left [for flip-up Arm Support] [not compatible with Z5BAR10 t ] Z7PAMR Pivoting Arm Mount - Right [for flip-up Arm Support] [not compatible with Z5BAR10 ] Z7ELROFL Forward Offset Elevating Leg Support - Left (includes Z7ADM) [compatible with seats that extend past front of frame by up to 2"] Z7ELROFR Forward Offset Elevating Leg Support - Right (includes Z7ADM) [compatible with seats that extend past front of frame by up to 2"] Z7NCA Neoprene Covers for Angle/Depth Adjustable Molded Footplates (pr) Z7OFLM [Quantity of 2] - Offset Foot Support Receiver (ea) - Lateral / Medial 2" offset Z7HSTL Head Support w/ Large Pad [12" x 6" (30cm x 15cm)] Z7LTS1L Lateral Thoracic Support w/ Small Depth-Adjustable Pad - Left [5.25"x 3.25"] Z7LTS1R Lateral Thoracic Support w/ Small Depth-Adjustable Pad - Right [5.25"x 3.25"] Z7LGT2L Leg Adductor w/ Large Adjustable Pad - Left [6.5" x 4"] [for
LOCAL STOCK NUMBER: Z300S18 0009
1.00
EA
Raz-AT standard 18"W (46cm) base and seat frame [will fit over most toilets] - Attendant Tilt Mobile Shower Commode Chair with 40? tilt range, height adjustable stainless steel frame, four dual-locking 5" (125mm) casters, head support fixture with small pad, angle adjustable back, foot supports and commode pan. User weight capacity 400 lbs. Shall Include a quantity of one (1) each unless noted otherwise in the description: Z436LTO Visco-Foam Interface Seat 18"W x 16"D (46cm x 41cm) - Left Access Z436RTO-A Visco-Foam Interface Seat 18"W x 16"D (46cm x 41cm) - Right Access (Off-Chair Assembly - includes brackets/hardware) Z51518 Adjusta-Back for standard width - 18"W x 20"H (46cmW x 51cmH) with angle/height-adjustable flip-up arm supports and tension-adjustable back upholstery. [Includes Arm Support Lock Kit (Z710)] Z5BAR13 Flip-Up Arm Supports - 13"L (33cm) pad (pr) Z705N Foot Supports w/ standard footplates (pr) [leg lengths 16"-20.5" (40-52cm)] Z7OFLM [Quantity of 2] - Offset Foot Support Receiver (ea) - Lateral / Medial 2" offset Z7CSIC22 Calf Strap Snap-On Infection Control - for 22" (56cm) wide chair [not compatible with Z7FB] [for Raz-AP/SP/AT/AP600/SP600/AT600] Z7HSTL Head Support w/ Large Pad [12" x 6" (30cm x 15cm)] Z7LTS1L Lateral Thoracic Support w/ Small Depth-Adjustable Pad - Left [5.25"x 3.25"] Z7LTS1R Lateral Thoracic Support w/ Small Depth-Adjustable Pad - Right [5.25"x 3.25"] Z7LGT2L Leg Adductor w/ Large Adjustable Pad - Left [6.5" x 4"] [for Raz-CAT/AT/AT600] Z7LGT2R Leg Adductor w/ Large Adjustable Pad - Right [6.5" x 4"] [for Raz-CAT/AT/AT600] ZCBICL Chest Belt - Infection Control Large 1-piece w/ side-release buckle [chest belt must never be used without a pelvic belt] [65" Max Length - fits back widths 18"-22"] ZPBICL Pelvic Belt - Infection Control Large 2-piece w/ side-release buckle [fits seat frame widths 18"-22"] Z675 Directional Caster Lock - fits on left rear caster [facilitates steering] [for Raz-AT/CAT/AT600] Z66T5 Anti-Tippers for 5" Casters (pr) installed on rear [for Raz-AT/CAT]
LOCAL STOCK NUMBER: Z300S18 0010
1.00
EA
10 Raz-SP standard 18"W (46cm) base frame [will fit over most toilets] - Self Propel Mobile Shower Commode Chair with height-adjustable stainless steel frame, 22" or 24" (560mm or 600mm) rear wheels, adjustable axle plate, wheel locks, two dual-locking 5" (125mm) casters, angle adjustable back, foot supports and commode pan. User weight capacity 400 lbs. Shall Include a quantity of one (1) each unless noted otherwise in the description: Z436LTO Visco-Foam Interface Seat 18"W x 16"D (46cm x 41cm) - Left Access Z508 Fixed Back 18"W x 18"H (46cmW x 46cmH) - Includes molded vinyl back support, fixed-height flip-up padded arm supports, back angle adjustment (90?/97?) with cane-style posts. Arm Support Lock Kit (Z710) is not included Z5BU1818 Tension-Adjustable Back Upholstery 18"W x 18"W (Use on Z508) Z710 Arm Support Lock Kit (pr) [for non-HD backs] [for Raz-AP/SP/AT/CAT/ART/Z?m] Z5BAR13 Flip-Up Arm Supports - 13"L (33cm) pad (pr) Z612R Rear 22" (560mm) Diameter Wheels w/ Ergonomic Textured Handrims (pr) [for Raz-SP] Z622VHR Vinyl-Coated Handrims for 22" (560mm) Rear Wheels (pr) [for Raz-SP] Z705N Foot Supports w/ standard footplates (pr) [leg lengths 16"-20.5" (40-52cm)] Z708ADJ Adjustable Heel Loops - (pr) [not compatible with Z7VS/Z7FB] Z7NCS Neoprene Covers for Standard Footplates (pr) Z66SPR Anti-Tippers - Telescoping for Regular Frame (pr) [rear only for Raz-SP/SP600] Z6WLE Wheel Lock w/ Extension Tubes (pr) [for Raz SP/SP600] Z7LGAS1L Leg Adductor w/ Small Adjustable Pad - Left [5.25"x 3.25"] [for Raz-AP/SP] Z7LGAS1R Leg Adductor w/ Small Adjustable Pad - Right [5.25"x 3.25"] [for Raz-AP/SP] ZCBICL Chest Belt - Infection Control Large 1-piece w/ side-release buckle [chest belt must never be used without a pelvic belt] [65" Max Length - fits back widths 18"-22"] ZPBICL Pelvic Belt - Infection Control Large 2-piece w/ side-release buckle [fits seat frame widths 18"-22"]
LOCAL STOCK NUMBER: Z20018 0011
1.00
EA
Raz-SP standard 18"W (46cm) base frame [will fit over most toilets] - Self Propel Mobile Shower Commode Chair with height-adjustable stainless steel frame, 22" or 24" (560mm or 600mm) rear wheels, adjustable axle plate, wheel locks, two dual-locking 5" (125mm) casters, angle adjustable back, foot supports and commode pan. User weight capacity 400 lbs. Shall Include a quantity of one (1) each unless noted otherwise in the description: Z436RTO Visco-Foam Interface Seat 18"W x 16"D (46cm x 41cm) - Right Access Z508 Fixed Back 18"W x 18"H (46cmW x 46cmH) - Includes molded vinyl back support, fixed-height flip-up padded arm supports, back angle adjustment (90?/97?) with cane-style posts. Arm Support Lock Kit (Z710) is not included Z5S18 Symphony Back 18"W (46cm) - Recessed solid back support [Not compatible with 15"H back frames] Z710 Arm Support Lock Kit (pr) [for non-HD backs] [for Raz-AP/SP/AT/CAT/ART/Z?m] Z5BAR13 Flip-Up Arm Supports - 13"L (33cm) pad (pr) Z612R Rear 22" (560mm) Diameter Wheels w/ Ergonomic Textured Handrims (pr) [for Raz-SP] Z622VHR Vinyl-Coated Handrims for 22" (560mm) Rear Wheels (pr) [for Raz-SP] Z705N Foot Supports w/ standard footplates (pr) [leg lengths 16"-20.5" (40-52cm)] Z708ADJ Adjustable Heel Loops - (pr) [not compatible with Z7VS/Z7FB] Z7NCS Neoprene Covers for Standard Footplates (pr) Z66SPR Anti-Tippers - Telescoping for Regular Frame (pr) [rear only for Raz-SP/SP600] Z6WLE Wheel Lock w/ Extension Tubes (pr) [for Raz SP/SP600] Z7LGAS1L Leg Adductor w/ Small Adjustable Pad - Left [5.25"x 3.25"] [for Raz-AP/SP] Z7LGAS1R Leg Adductor w/ Small Adjustable Pad - Right [5.25"x 3.25"] [for Raz-AP/SP] ZCBICL Chest Belt - Infection Control Large 1-piece w/ side-release buckle [chest belt must never be used without a pelvic belt] [65" Max Length - fits back widths 18"-22"] ZPBICL Pelvic Belt - Infection Control Large 2-piece w/ side-release buckle [fits seat frame widths 18"-22"]
LOCAL STOCK NUMBER: Z20018 0012
1.00
EA
Raz-SP standard 18"W (46cm) base frame [will fit over most toilets] - Self Propel Mobile Shower Commode Chair with height-adjustable stainless steel frame, 22" or 24" (560mm or 600mm) rear wheels, adjustable axle plate, wheel locks, two dual-locking 5" (125mm) casters, angle adjustable back, foot supports and commode pan. User weight capacity 400 lbs. Shall Include a quantity of one (1) each unless noted otherwise in the description: Z439LTO Visco-Foam Interface Seat 18"W x 19"D (46cm x 48cm) - Left Access Z439RTO-A Visco-Foam Interface Seat 18"W x 19"D (46cm x 48cm) - Right Access (Off-Chair Assembly - includes brackets/hardware) [for Raz-AP/SP/AT/ART] Z508 Fixed Back 18"W x 18"H (46cmW x 46cmH) - Includes molded vinyl back support, fixed-height flip-up padded arm supports, back angle adjustment (90?/97?) with cane-style posts. Arm Support Lock Kit (Z710) is not included Z5BU1818 Tension-Adjustable Back Upholstery 18"W x 18"W (Useon Z508) Z710 Arm Support Lock Kit (pr) [for non-HD backs] [for Raz-AP/SP/AT/CAT/ART/Z?m] Z5BAR13 Flip-Up Arm Supports - 13"L (33cm) pad (pr) Z612R Rear 22" (560mm) Diameter Wheels w/ Ergonomic Textured Handrims (pr) [for Raz-SP] Z622VHR Vinyl-Coated Handrims for 22" (560mm) Rear Wheels (pr) [for Raz-SP] Z705N Foot Supports w/ standard footplates (pr) [leg lengths 16"-20.5" (40-52cm)] Z7FET2 Foot Support Extension Tubes (pr) [2" longer footrest range] [not compatible with Z7MFX8/Z7ADM/Z7VS/Z7FBAS] Z708ADJ Adjustable Heel Loops - (pr) [not compatible with Z7VS/Z7FB] Z7NCS Neoprene Covers for Standard Footplates (pr) Z66SPR Anti-Tippers - Telescoping for Regular Frame (pr) [rear only for Raz-SP/SP600] Z6WLE Wheel Lock w/ Extension Tubes (pr) [for Raz SP/SP600] Z7LGAS1L Leg Adductor w/ Small Adjustable Pad - Left [5.25"x 3.25"] [for Raz-AP/SP] Z7LGAS1R Leg Adductor w/ Small Adjustable Pad - Right [5.25"x 3.25"] [for Raz-AP/SP] ZCBICL Chest Belt - Infection Control Large 1-piece w/ side-release buckle [chest belt must never be used without a pelvic belt] [65" Max Length - fits back widths 18"-22"] ZPBICL Pelvic Belt - Infection Control Large 2-piece w/ side-release buckle [fits seat frame widths 18"-22"]
LOCAL STOCK NUMBER: Z20018 0013
1.00
EA
Raz-SP standard 18"W (46cm) base frame [will fit over most toilets] - Self Propel Mobile Shower Commode Chair with height-adjustable stainless steel frame, 22" or 24" (560mm or 600mm) rear wheels, adjustable axle plate, wheel locks, two dual-locking 5" (125mm) casters, angle adjustable back, foot supports and commode pan. User weight capacity 400 lbs. Shall Include a quantity of one (1) each unless noted otherwise in the description: Z439RRO Visco-Foam Interface Seat 18"W x 19"D (46cm x 48cm) - Rear Access Z508 Fixed Back 18"W x 18"H (46cmW x 46cmH) - Includes molded vinyl back support, fixed-height flip-up padded arm supports, back angle adjustment (90?/97?) with cane-style posts. Arm Support Lock Kit (Z710) is not included Z5S18 Symphony Back 18"W (46cm) - Recessed solid back support [Not compatible with 15"H back frames] Z710 Arm Support Lock Kit (pr) [for non-HD backs] [for Raz-AP/SP/AT/CAT/ART/Z?m] Z5BAR13 Flip-Up Arm Supports - 13"L (33cm) pad (pr) Z612R Rear 22" (560mm) Diameter Wheels w/ Ergonomic Textured Handrims (pr) [for Raz-SP] Z622VHR Vinyl-Coated Handrims for 22" (560mm) Rear Wheels (pr) [for Raz-SP] Z705N Foot Supports w/ standard footplates (pr) [leg lengths 16"-20.5" (40-52cm)] Z7FET2 Foot Support Extension Tubes (pr) [2" longer footrest range] [not compatible with Z7MFX8/Z7ADM/Z7VS/Z7FBAS] Z708ADJ Adjustable Heel Loops - (pr) [not compatible with Z7VS/Z7FB] Z7NCS Neoprene Covers for Standard Footplates (pr) Z66SPR Anti-Tippers - Telescoping for Regular Frame (pr) [rear only for Raz-SP/SP600] Z6WLE Wheel Lock w/ Extension Tubes (pr) [for Raz SP/SP600] Z7LGAS1L Leg Adductor w/ Small Adjustable Pad - Left [5.25"x 3.25"] [for Raz-AP/SP] Z7LGAS1R Leg Adductor w/ Small Adjustable Pad - Right [5.25"x 3.25"] [for Raz-AP/SP] ZCBICL Chest Belt - Infection Control Large 1-piece w/ side-release buckle [chest belt must never be used without a pelvic belt] [65" Max Length - fits back widths 18"-22"] ZPBICL Pelvic Belt - Infection Control Large 2-piece w/ side-release buckle [fits seat frame widths 18"-22"]
LOCAL STOCK NUMBER: Z20018
Attachments/Links
Attachments
file uploads
Document | File Size | Access | Updated Date |
|
20 KB
|
Public |
Jan 10, 2023
|
Contracting Office Address
- 2301 E. LAMAR BLVD
- ARLINGTON , TX 76006
- USA
Primary Point of Contact
- Matt Lee
- matthew.lee5@va.gov
- Phone Number 210-694-6337
Secondary Point of Contact
- Jan 11, 2023 12:13 am CST Solicitation (Original)
- Jan 10, 2023 11:27 pm CSTPresolicitation (Original)
TRY FOR FREE
Not a USAOPPS Member Yet?
Get unlimited access to thousands of active local, state and federal government bids and awards in All 50 States.